The term thermal solar power refers to systems that convert solar radiation into useful heat. This is also referred to as passive solar energy. It is a different type of system from solar power electricity, and whose usefulness should not be overlooked.

Thermal solar power can be used in as many ways as you can think. Designs exist from heating up your hot water tanks, to industrial steam generation and everything in between. Many of these systems are attractive because of their low cost and simplicity.

For small scale users like ourselves, thermal solar power can be integrated into our homes. The most practical applications are for hot water and home heating, and there are a variety of designs in use. Equally as important is that thermal solar power systems are affordable and easy to use.

Pebble bed heat exchangers are another application for thermal solar power. They are like the thermodynamic equivalent of a water tank. They give us a nice reservoir with which to store and distribute excess energy.

Pebble bed heat exchangers can be used in a variety of ways. They can be wall mounted units, or embedded in the floor. They can provide the heat source for everything from a family room, to a workshop, greenhouse, or dry sauna installation. They have good aesthetic qualities, being composed of natural materials, and can be incorporated in an attractive way into any home.

The typical operating temperature of a basic thermal solar power system will be somewhere between 100F and 200F. For high performance designs, up to 700F has been achieved for making high pressure steam. The exact temperatures we can obtain will depend entirely on the solar collector design and your system’s needs.

Solar collectors are designed to achieve a certain operating temperature. Flat plate and evacuated tube collectors are very effective at lower system temperatures. Parabolic trough and concentrating collectors are required for higher system temperatures. The solar collector is quite possibly the most important component in your thermal solar power system. It is the thermodynamic engine and should be selected thoroughly and carefully.

The circulating fluid flows through the solar collector to distribute the heat through your system. It should be selected based on the peak operating temperatures and equipment compatibility. Typical fluids are glycol, oil, and water. A low flow pumping system will be needed that is agreeable with your operating conditions.

Anyone seriously interested in energy independence should start with thermal solar power technology. The components are simple and inexpensive. If you could identify your climate as having reasonable amounts of Sun, then thermal solar power is encouraged to the fullest extent.

Thermal power systems are typically less expensive than solar power electricity, and can create household hot water and heat reliably. With the addition of pebble bed storage and higher operating temperatures, then the amount of potential uses suddenly becomes many. With the markets of sustainability re-growing their roots we expect to see a variety of new designs and installations in years to come.