In: Home & Family26 Aug 2013
It is common for an old water heater to stop operating smoothly once it has reached the end of its lifespan. Loose valves, internal tank corrosion, faulty valves and deteriorated anode rods can lead to water heater leaks. When this happens, it is best to look for other signs of leaks to prevent further damage. If you think your water heater is not yet ready for a replacement, perform regular maintenance to keep it in good condition. When unsure, ask help from a professional to detect the problem before it escalates.
Water heaters, if not dealt properly, can pose serious dangers to you and your family. Always turn off the heating source of your unit before the repair process. Water and electricity are never a good match, that is why this step is essential to keep you safe from fatal accidents. Shutting down the cold water supply valve stops water from leaking temporarily. Having a safe environment to work with should be your priority, especially when handling water heater issues.
Water heaters can leak easily if cold water is mixed with hot water inside the storage tank. When this happens, condensation takes place. This shouldn’t be a problem since all you have to do is to wait until the leak stops right after it starts heating water. This is a common problem, especially if you live in a colder climate.
There are times when leaks start from the T&P valve. This happens when the temperature inside the tank is too high or your relief valve may be malfunctioning. Experts recommend not setting the temperature above 120 degrees Fahrenheit since doing so can causes your tank to overheat or worse, blow up. Avoid dangerous accidents by replacing the relief valve as soon as possible.
Having loose pipe fittings result to continuous water heater leaks. To detect where the leaks are coming from, look for signs of rust stains. Solve the problem by using a wrench to tighten the pipes. For badly damaged pipes, replace them immediately and wrap a Teflon tape around the threading. Using a sealant is also recommended to stop water from leaking. Water splashes from a leaky pipe can affect other areas of your unit.
Excessive rust and corrosion inside your tank can cause it to deteriorate and eventually stop working. When this happens, consider buying a replacement water heater immediately. Hard water mineral deposits affect the water quality, heating efficiency and smooth operation of the water heater. If you don’t take action as soon possible, the sediments can contaminate your water, leading to rusty water of foul odor. Remember that ingesting water filled with chemicals and bacteria can result to major health complications. Using water softeners are not recommended since doing so cause rust to develop faster. Flush and drain your tank every six months to get rid of the sediments inside your tank.
Letting sediments sit inside the tank for a long time can result to water heater holes. Upon reaching this point, you might want to ask help from a specialist since your tank is beyond repair. Some homeowners prefer to patch these holes for an inexpensive repair. However, doing this only increases their electric costs, since their unit will be using more energy to heat water. Ask help from a specialist if you have plans of replacing your water heater.
Fixing a leaking water heater shouldn’t be so difficult if you detect signs of damage in the early stage. If you’re on a tight budget and still not ready to buy a replacement unit, maintain your water heater regularly to extend its lifespan. If you encounter problems along the way, do not hesitate to call a specialist. Do not forget to inspect your water heater on a semi-annual basis to keep it in good condition. Professional water heater technicians only provide quality services for your heating system. Guaranteed!