Home ventilation is quintessential in rendering a sound setup to your home. To ensure that the attic is ventilated properly, a vent needs to be installed in your roof. The vent would allow an easy passage for the escape of the air which in turn would prevent your home from problems of leaks and molds.

To restore the normality of your roof and home, a vent needs to be inculcated in the scheme of the things. The vent in the roof would prevent the home from attaining an airtight setting.

Though the task appears to be daunting and complex at first sight but with proper logic and right set of tools, the project can be handled by even a novice like you. A hand-held hammer, a pry bar tool, a circular saw, pliers etc. would ease up the burden to a large extent. In addition, certain supplies such as roofing cement, sealer etc. need to be purchased as well.

Ground a ladder firmly and climb up to the roof. The spread of the roof which looks appropriate for the installation of the vent is detected first. Slip the business-end of the tool under the edges of the concerned shingle and push down the other end of the tool to uproot the nails. All the adjoining shingles are detached partially in such a way that no damage is done to them.

Once a ridge cap is rendered to the determined area, mark down the zone around the cap with a bright-colored piece of chalk. Leave out about 7-8 inches on either side of the ridge cap. This is because the size of the vent and it’s associated base may be a bit larger than the anticipated size.

Now, take a circular saw to the roof and cut the shingles from the predefined markings. Before the commencement of the cutting task, set the blade of the saw so that it doesn’t damage the underlying roof rafters. Clean off the surface of the roof and pry up the altered shingles from the setup.

Visit a local hardware store to buy a new vent. There are different types of vents available in the market. Out of them, the baffled vents would serve the required purpose quite well as they prevent the external air from coming into the attic. Although, the internal hot air escapes out well from the vent. Once the baffled vent is set in place, envelop the area with the shingles and cement the nailed setup.

Keep all the safety precautions in tact during the life of the project.

Scott Rodgers is a great expert who has been experting on roofing works for a long time now. His expertise and guidance has given motivation to a number of workers, ranging from Springtown Roofers (Need one? click here!) to Poquoson Roofers (Need one? click here!).