In: Home & Family21 Jul 2013
To be able to use the water heater for a long time, regular and proper maintenance is required. Doing this from time to time can help you cut back on your electricity bill and spares you from costly water heater repairs. Read on to know more about how to keep your tank in its tip-top shape.
A water heater is designed with heavy steel together with several heating elements that are regulated by a thermostat. For maximum efficiency, these elements should be insulated at all times. However, since a water heater cannot last forever, expect it to malfunction sooner or later.
Rust and corrosion developing inside the tank can lessen the heating efficiency of your water heater. Look for rust stains all over your tank and replace badly damaged pipes to prevent water from contaminating. Neglecting to address the problem at once can cause you to buy a water heater out of the blue. Tighten all pipe fittings and valve to minimize and stop water heater leaks. However, do not over tighten the connections to avoid damage.
Do not let sediments sit inside the tank by draining and flushing it regularly. Failure to do so can lead to internal tank corrosion. When this happens, expect rusty-colored water to run in your pipes together with a foul odor. This is due to the sediment buildup inside the tank that is now too heavy for the unit to handle. If the problem continues after draining the tank, you might need to buy a water heater replacement to solve the issue.
Always check the water pressure of your tank by inspecting whether the gauge is set correctly. The pressure should not go over 80psi since having a high temperature can cause your tank to overheat and eventually explode. Do not put your life at risk and ask help from a specialist if you are not sure how to repair the water heater alone. Sometimes, attempting to fix it on our own can only complicate the situation.
If your household often uses hot water, you may have to install a water heater with a higher heating capacity. However, you can sustain the efficiency of your unit by draining and flushing it twice a year. Doing this gets rid of the sediments that can cause your tank to operate poorly. Do not underestimate this step since regular flushing can help extend the lifespan of your water heater.
Fight against rust and corrosion by checking the state of your anode rod every 2-3 years. This rod attracts charged water molecules like a magnet to protect the internal components and tank lining from rusting away. You may have to drain the heater to be able to inspect the rod thoroughly. Once it measures less than of an inch, replace it immediately. Using a water heater with a deteriorated anode rod can cause your tank to consume more energy than it used to.
To prevent the problem from escalating, do not hesitate to call a specialist for professional help. Leaving your water heater in the hands of the specialist will ensure that your unit is in good hands. Start performing water heater maintenance before it’s too late.